Molds & Casting
Plan molds, casting resin, mixing, pouring, bubbles, cure, and demolding.
Epoxy Resin Guides
Choose a subject to find practical guidance, comparisons, and relevant product research. Each section owns its topic; this page is the broad directory across the publication.
Browse by subject
Deep Pour
Choose products and plan thick castings around depth, volume, heat, and cure limits.
Adhesion
Match epoxy and surface preparation to metals, repairs, joints, and substrates.
Finishing
Diagnose cured surfaces and choose sanding, polishing, coating, or topcoat processes.
Flooring
Research concrete preparation, moisture, coating systems, application, and cure.
Safety
Understand uncured exposure, sensitization, cured epoxy, sanding dust, and heat.
Practical guides
Does Epoxy Resin Stick to Metal? Preparation by Metal Type
Yes, compatible epoxy can bond to prepared metal. Learn how cleaning, abrasion, oxidation, moisture, coatings, primers, and epoxy type affect steel, stainless, aluminum, and galvanized metal.
Epoxy Resin Allergy: Sensitization, Dermatitis, and Prevention
Learn how epoxy sensitization differs from skin irritation, what exposure routes matter, how product-specific gloves and ventilation reduce contact, and when symptoms need medical evaluation.
How Thin Can You Pour Liquid Glass Epoxy? Product-Specific Limits
Liquid Glass minimum thickness depends on the Superclear formula. Compare standard Deep Pour, 24 Hour, Table Top, and Countertop layer guidance before choosing.
How to Clean Epoxy Resin Molds Without Damaging Them
Clean silicone and rigid epoxy molds safely by residue type. Learn when soap, solvents, heat, or tools can damage a mold and when replacement is wiser.
How to Pour Epoxy Resin Into Molds: A Beginner's Guide
Learn how to choose compatible epoxy and molds, estimate resin, mix and pour accurately, manage bubbles, cure safely, demold, and troubleshoot common casting problems.
Is Epoxy Resin Toxic When Dry? Full Cure, Dust, Heat, and Food Contact
A careful guide to dry versus fully cured epoxy, incomplete cure, passive contact, sanding dust, heating and decomposition, PPE, and why cure alone does not establish food-contact approval.