BallistiX BulletProof Single Shot Review: A Floor-Coating System
BallistiX BulletProof Single Shot is a two-component, 100%-solids epoxy coating for floors. It is sold for garages, basements, workshops, and commercial spaces—not as a craft, tabletop, or deep-casting resin.
This is a research-based review. We have not purchased, installed, or personally tested Single Shot. The assessment uses BallistiX’s current product listings, technical data sheet, and technical/safety document library.
Quick Verdict
Single Shot is most credible as a high-build floor coating for someone who can properly evaluate and prepare the substrate, stage a fast application, and control temperature, humidity, and moisture. The 3-gallon pre-tinted listing includes two gallons of Part A, one gallon of Part B, and a mixer; it is not a complete garage-renovation package with grinding, crack repair, rollers, footwear, or every required system layer.
The main limitation is not the 2:1 ratio. It is the difference between the documented 10-15 minute pot life and roughly 40-minute working time once the material is spread. A mixed bucket cannot sit while the installer improvises. Coverage also changes sharply with film thickness and floor condition.
Product Identity: Single Shot and Single Shot Reloaded Are Not the Same Listing
BallistiX currently lists both Single Shot and Single Shot Reloaded. The original Single Shot remains available in 3- or 4-gallon listings, while Reloaded is a newer 3-gallon formulation with a separate TDS and different published performance values.
This legacy review is therefore about the original Single Shot represented in the historical URL. It does not silently replace its specifications with Reloaded values. Buyers considering the newer product should read the Reloaded TDS for the exact kit they receive.
What Kind of Epoxy Is Single Shot?
The original TDS calls Single Shot a solvent-less, two-component epoxy coating system. It is positioned for a dense, cleanable floor surface and can be applied in multiple compatible layers. Current sales material describes garage, basement, workshop, and commercial-floor use.
That classification matters. A floor coating is selected by substrate profile, moisture, film build, recoat timing, traffic, and complete system compatibility. It should not be selected by the rules used for molds, jewelry, river tables, or tabletop flood coats.
Documented Specifications
| Specification | Original Single Shot documentation |
|---|---|
| Kit size reviewed | 3 US gallons |
| Kit components | 2 gallons Part A, 1 gallon Part B, and one mixer in the current pre-tinted listing |
| Mix ratio | 2A:1B by volume |
| Solids | 100% by volume and weight |
| Pot life | 10-15 minutes at 77°F |
| Working time | About 40 minutes |
| Application substrate range | 50-86°F |
| Relative humidity limit | Below 85% |
| Substrate moisture limit | No more than 4% in the TDS |
| Foot traffic at 68°F | About 24 hours |
| Light traffic at 68°F | About 3 days |
| Full cure at 68°F | About 7 days |
| Service temperature | -4°F to 122°F |
These times are conditional, not promises for every slab. The TDS says ambient conditions, temperature, and relative humidity affect cure and recoat timing.
Coverage Depends on the Floor System
Single Shot’s TDS reports coverage by intended film build:
| System use | Documented thickness | Approximate coverage |
|---|---|---|
| Solid-color primer | 10 mils | 150 sq ft/gal |
| Solid-color finish | 16 mils | 100 sq ft/gal |
| Flake-system primer | 10 mils | 150 sq ft/gal |
| Flake-system finish | 13 mils | 120 sq ft/gal |
| Metallic-system primer | 10 mils | 150 sq ft/gal |
| Metallic-system finish | 40 mils | 40 sq ft/gal |
The current pre-tinted kit page gives an easier planning estimate of approximately 300 square feet per 3-gallon kit, subject to substrate porosity and application. That aligns with a roughly 100-square-foot-per-gallon finish coat; it does not override the TDS or guarantee that every three-gallon kit covers every nominal 300-square-foot floor.
Surface Preparation and Application Requirements
The original TDS calls for a thoroughly cleaned substrate and mechanical methods such as blasting or water blasting to remove contaminants and oil or grease. BallistiX’s current technical guidance emphasizes that the correct profile depends on the slab and complete coating system.
Before mixing, the installer needs to resolve:
- Whether the concrete is sound and dry enough for this system
- Oil, grease, sealers, curing compounds, weak laitance, and incompatible old coatings
- Cracks, joints, spalls, and edge details
- The required mechanical profile and dust collection
- Dew point, condensation, substrate temperature, and humidity
- Primer, color, flake or metallic layers, and compatible topcoat requirements
The TDS directs installers to combine Parts A and B at 2:1 by volume with a low-speed drill, then spread a thin, even layer using a rubber squeegee and back-roll it without puddling. The practical takeaway is to plan batches, crew movement, tools, and an exit path before the two parts meet.
Recoat and Cure Schedule
At a substrate temperature above 68°F, the original TDS gives:
- 12 hours minimum and 2 days maximum before applying Single Shot over primer
- 24 hours minimum and 2 days maximum before a second Single Shot coat
- About 24 hours to foot traffic
- About 3 days to light traffic
- About 7 days to full cure
The windows lengthen near 50°F and shorten near 86°F. If a recoat window is missed, do not assume a new layer will bond without additional preparation; follow the TDS and obtain current BallistiX guidance for the exact system.
Strengths
Clear Technical Classification
The product has a first-party TDS that reports mix ratio, pot life, working time, film builds, coverage, recoat windows, cure stages, and environmental restrictions. That is materially better than a floor coating supported only by marketplace copy.
Useful System-Specific Coverage
Coverage is tied to solid-color, flake, and metallic film builds instead of one inflated universal number. That makes realistic material planning possible.
Current Availability
The original Single Shot remains listed alongside Reloaded. The historical product has not simply vanished, although buyers need to confirm which formulation and document revision their seller supplies.
Limitations
Short Pot Life
Ten to fifteen minutes in a small mixed mass is a demanding window. Warm material, large batches, or leaving it in the bucket can reduce practical handling time further.
Preparation Is a Separate Project
Cleaning alone is not a substitute for the profile, repairs, moisture evaluation, and system design required by the actual slab.
The Kit Is Not the Whole Floor System
The current kit listing names Part A, Part B, and a mixer. It does not establish that primers, repair products, broadcast media, rollers, a topcoat, surface-preparation equipment, or personal protective equipment are included.
Original and Reloaded Data Cannot Be Blended
Reloaded publishes different VOC, application, and performance values. Specifications should come from the label and TDS matching the purchased product—not from a review that treats the names as interchangeable.
Who Is It Best For?
Single Shot makes the most sense for an installer who understands high-build flooring systems and can:
- Mechanically prepare and evaluate concrete
- Measure a 2:1 system accurately
- Move a mixed batch onto the floor immediately
- Maintain film thickness and a wet edge
- Observe environmental and recoat limits
- Confirm the compatibility of every system layer
Someone seeking a small craft resin, a deep-pour material, or a simple paint-style garage kit should choose a product designed and documented for that use.
Safety and Use Considerations
BallistiX provides TDS/SDS links for Single Shot, and the TDS calls for ventilation, chemical-resistant gloves, and eye protection. CDC/NIOSH advises users of uncured epoxy systems to read the exact label and SDS, maximize ventilation, and select glove material and eye protection for the actual components.
Do not use odor as an exposure gauge. Floor preparation can also create dust and expose old coatings or contaminants, so its controls must be planned separately from resin handling.
Final Assessment
BallistiX Single Shot is a documented, current 100%-solids flooring epoxy with a simple 2:1 ratio but professional-style application constraints. Its strongest points are transparent film-build coverage, a defined cure schedule, and current first-party documents. Its biggest risks are rushed batching, inadequate floor preparation, moisture, and mixing values from the original and Reloaded formulations.
The product deserves consideration for a properly designed interior floor system. It does not deserve to be described as a universal resin or a shortcut around substrate preparation.
Sources
- BallistiX Single Shot 3-gallon kit - current availability, kit components, colors, and simplified coverage estimate.
- Original Single Shot TDS - product class, mix ratio, film builds, coverage, pot life, working time, cure/recoat schedule, environmental limits, and application method.
- Single Shot Reloaded product page - confirmation that Reloaded is a separately listed current product.
- BallistiX document library - current technical and safety document index.
- CDC/NIOSH epoxy guidance - general handling and exposure-control principles for uncured epoxy systems.